As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
Casino Plus app-APP, download it now, new users will receive a novice gift pack.
As shown in the figure below, the names of the exterior parts of the car. 2: As shown in the figure below, the name of the internal structure of the car.
Vehicle exterior parts diagram Basically, the exterior parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
The car bumper is composed of three parts: outer plate, buffer material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact. As shown in the figure: The car leaf plate, also known as the wing plate, is located outside the body of the wheel, which can be said to be a covering part, which is conducive to the stability of the car.
Everyone must know that the steering wheel controls the direction of the car. The clutch pedal should be stepped on before hanging and removing the gear, which has the effect of making the car start smoothly and protecting the gears.Brake Brake is also called brake. Step on the brake pedal to achieve rapid braking of the car.
1. In radiator and engine gas The circulation channel in the cylinder is used to cool the liquid medium of the engine, mainly water and additives.Because of its antifreeze function, it is called antifreeze. Glass kettle: Everyone knows that it is used to clean glass. Now you should tell me where it is. Oil scale: oil volume detector.
2. The structure diagram of the automobile engine is as follows: the engine is composed of two major mechanisms: crank connecting rod mechanism and gas distribution mechanism, as well as five major systems such as cooling, lubrication, ignition, fuel supply and start-up system. The main components include cylinder block, cylinder head, piston, piston pin, connecting rod, crankshaft, flywheel, etc.
3. The fusele group is mainly composed of cylinder block, cylinder liner, cylinder head, cylinder pad and other parts. Cylinder block The cylinder block is made of gray cast iron. The cylindrical cavity in the upper part of the cylinder is called the cylinder. The lower half is the crankcase supporting the crankshaft, and its lumen is the space for the movement of the crankshaft.
4. Cylinder block.The cylinder block is the body of the cylinder. The crankcase is divided into upper and lower parts. The upper crankcase is used to support the crankshaft. The cylinder block and the upper crankcase of the water-cooled engine are cast into one, referred to as the cylinder block, as shown in Figure 3-8. It is the most complex part and the most massive part in the engine.
5. The engine of a car is composed of two major mechanisms and five major systems, namely the crank connecting rod mechanism, the gas distribution mechanism and the cooling system, the lubrication system, the fuel system, the start system and the ignition system. Each system is composed of relevant parts. The following is the parts recognition diagram of the engine.
Automobile engine: The engine is the power device of the automobile.It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
Engine lubrication system structure diagram Engine gas distribution mechanism connecting rod mechanism structure diagram engine body structure diagram engine cooling system structure diagram This is the structure diagram of the automobile engine. If you can't appreciate it yet, please take a look at the next most comprehensive internal structure diagram of the automobile system in history.
Auto parts name and engine structure diagram. Engine: The engine is the power unit of the car, which is composed of two major institutions and five major departments. Crank connecting rod mechanism: composed of fusele, piston connecting rod group, crankshaft flywheel group, etc.
1. The specific illustration is as follows: The car bumper is composed of three parts: outer plate, cushion material and beam, which can not only beautify the appearance of the whole vehicle, but also absorb and slow down the external impact.
2. As shown in the figure below, the name of the exterior part of the car. 2: As shown in the figure below, the name of the internal structure of the car.
3. Basically, the appearance parts of every car are similar. The picture above is an illustration of the appearance name of the car. We can intuitively see the exterior accessories, logos, headlights, doors, trunks, door handles, fuel tank caps, wipers, etc. of the car and the name. The names and their positions are marked in great detail.
4. Car engine: The engine is the power device of the car. It is composed of fuselage, crank connecting rod mechanism, gas distribution mechanism, cooling system, lubrication system, fuel system and ignition system (diesel engine does not have ignition system), etc.
5. Car leaf plate The car leaf plate, also known as the wing plate, is located outside the body of the wheel and can be said to be a covering part. It can not only reduce the wind resistance coefficient when driving according to aerodynamics, but also greatly help the stability of the car.
UEFA Champions League live streaming app
author: 2025-01-10 17:16Hearthstone arena deck Builder
author: 2025-01-10 17:01Hearthstone arena deck Builder
author: 2025-01-10 16:50Hearthstone arena class win rates reddit
author: 2025-01-10 17:26214.35MB
Check788.95MB
Check911.83MB
Check176.66MB
Check288.92MB
Check234.69MB
Check429.28MB
Check284.82MB
Check231.62MB
Check654.74MB
Check894.14MB
Check673.77MB
Check681.75MB
Check735.49MB
Check363.83MB
Check486.18MB
Check634.48MB
Check445.77MB
Check877.28MB
Check757.75MB
Check597.69MB
Check476.45MB
Check231.65MB
Check945.55MB
Check331.48MB
Check251.56MB
Check368.75MB
Check889.66MB
Check729.67MB
Check657.67MB
Check429.85MB
Check439.93MB
Check446.28MB
Check728.33MB
Check426.78MB
Check375.39MB
CheckScan to install
Casino Plus app to discover more
Netizen comments More
2528 Hearthstone arena deck Builder
2025-01-10 18:00 recommend
1762 UEFA Europa League
2025-01-10 17:37 recommend
1293 DigiPlus Philippine
2025-01-10 16:50 recommend
76 UEFA Europa League
2025-01-10 16:23 recommend
414 Casino free 100 no deposit
2025-01-10 16:12 recommend